Ordnance Factory and Defence Civilian Pay Calculator

Add DA, HRA, night duty allowance, overtime and piece work bonus to get the gross pay of a factory worker.

By B. Mani · Last updated: 2 November 2026 · How we calculate

Piece worker inputs

Duty-based pay

Basic pay
DA
HRA
Transport allowance + DA
Night duty allowance
Overtime
Piece work bonus (PWB)
Risk / hardship + other
Gross monthly pay
NPS contribution
Net monthly pay (before tax)
Output performance

Estimate. Factory and DPSU orders decide the exact formulas and rates.

Quick Answer

Piece worker, basic ₹25,500: with DA at 63%, 40 night hours, 10 overtime hours and 50 hours saved at a 50% bonus share, the gross pay is about ₹69,838 a month.

Share:TelegramFacebookX

Formula: Ordnance Factory and Defence Civilian Pay

DA = Basic Pay × DA% ÷ 100 (DA at 63%)

Hourly Rate = (Basic Pay + DA) ÷ Standard Hours per Month

Night Duty Allowance = (Basic Pay + DA) ÷ 200 × Night Duty Hours (basic pay up to ₹43,600)

Overtime = Hourly Rate × 2 × Overtime Hours

Piece Work Bonus = (Allowed Hours − Actual Hours) × Hourly Rate × Bonus Share%

Employees of ordnance factories, naval dockyards and other defence industrial units draw pay that looks different from a standard office salary. Besides basic pay and DA, they may receive night duty allowance, overtime, an incentive for output above the standard, and special allowances for risk or hardship. This calculator puts these components in one pay slip. Choose whether you are a day worker or a piece worker, enter your basic pay and duty details, and the tool adds up the gross pay and the NPS contribution.

Who Is Covered?

The Ordnance Factory Board was converted in October 2021 into seven defence public sector undertakings: Munitions India Limited, Armoured Vehicles Nigam Limited (AVANI), Advanced Weapons and Equipment India Limited (AWEIL), Troop Comforts Limited, Yantra India Limited (YIL), India Optel Limited and Gliders India Limited. Employees of the former factories were moved to these companies, first on deemed deputation and later by absorption, with conditions of service that depend on the company's orders. Civilian employees at naval dockyards and some base repair depots remain Government employees under the Ministry of Defence. Because the terms differ, this page uses the central DA rate and standard allowances as editable inputs and asks you to check your own company or department orders.

Day Workers and Piece Workers

A day worker is paid a fixed monthly pay and is not paid an incentive for output. A piece worker, or an incentive worker, is paid the same fixed pay and in addition receives a bonus linked to the time saved against the time allowed for the work. Different factories use names such as piece work profit, incentive or production bonus, so confirm the term in your pay slip. The calculator uses a transparent model. The allowed time for the month is the number of units multiplied by the allowed hours for each unit. If the actual time is less, the saved hours are paid at your hourly rate, and a share of that value, which you can set, is paid as bonus. Replace the share with the percentage given in your factory's scheme.

Night Duty Allowance

For central government employees, night duty allowance is paid for duty between 10 pm and 6 am, at the rate of one two-hundredth of the sum of basic pay and DA for each hour, to employees whose basic pay is within a ceiling of ₹43,600 a month under the 7th CPC. The calculator applies this rule and pays no night duty allowance above the ceiling. Some industrial units use a different shift or night allowance, so check the orders of your unit.

Overtime for Factory Workers

Under the Factories Act, a worker who works more than the normal hours is entitled to overtime wages at twice the ordinary rate of wages. The calculator takes the ordinary rate as basic pay plus DA divided by the standard hours in a month, with 208 hours as the default, which is 26 days of 8 hours. Change it to match your factory's roster. Government rules on overtime allowance for office staff are different, so this model is for industrial staff only.

Worked Example: Piece Worker at ₹25,500

A piece worker with a basic pay of ₹25,500 receives DA of ₹16,065 at 63%. The hourly rate is ₹200. He completes 120 units with an allowed time of 2 hours each, so the allowed time is 240 hours, and takes 190 hours, saving 50 hours. At a 50% share, the piece work bonus is ₹4,996. With 40 night duty hours, the night duty allowance is ₹8,313, and 10 overtime hours bring ₹3,997. HRA at 20% is ₹5,100, and transport allowance with DA is ₹5,868. The gross monthly pay is ₹69,838. A day worker with the same basic pay and no night or overtime hours has a gross pay of ₹52,533.

How to Use the Calculator

  1. Select day worker or piece worker.
  2. Enter basic pay, DA, city class, transport allowance and standard hours.
  3. For a piece worker, enter output units, allowed hours per unit, actual hours and the bonus share.
  4. Enter night duty and overtime hours, and any risk or hardship allowance.
  5. Read the pay slip, the NPS contribution and the output performance.

Risk and Hardship Allowances

Employees who work with explosives, in hazardous processes or in difficult locations may receive risk, hardship or special allowances. The rates depend on the category of work and are set by the Government or the company, so enter the monthly amount from your order. DA may or may not be paid on such allowances, so check the order. The calculator adds the amount to the gross pay without any DA.

Checking Your Pay Slip

If your pay slip differs from the estimate, look at the head of account for each component. Compare the DA percentage and the date from which it applies, the hours counted for night duty and overtime, and the bonus period. Ask the pay office for the calculation sheet when the difference is more than a few rupees. For DA arrears of the revision to 63%, see the DA arrears calculator and the DA 63% impact matrix. For armed forces personnel, use the defence DA calculator.

Sample Pay Slips: Day Worker vs Piece Worker

The table compares gross monthly pay for three basic pay levels. The day worker column has no night duty, overtime or bonus. The piece worker column has 40 night hours, 10 overtime hours and 50 hours saved at a 50% share, with 20% HRA and ₹3,600 transport allowance, all with DA at 63%.

Basic PayDay Worker GrossPiece Worker GrossOf Which PWB
Level 3 (₹21,700)₹45,579₹60,306₹4,251
Level 4 (₹25,500)₹52,533₹69,838₹4,996
Level 6 (₹35,400)₹70,650₹94,674₹6,935

How to Count Time Saved Correctly

The saving is the allowed time for the accepted output minus the actual time taken. Output that is rejected, or work that has to be redone, is normally not counted, so enter only the accepted units. The allowed hours for each unit come from the job card or the time sheet and not from the worker's own estimate. If a job is delayed because of a break in material supply or a machine fault, the time lost is usually dealt with under separate rules, so confirm how your factory treats it.

DA and Arrears for Factory Staff

Industrial employees receive DA at the rate that the Government or the company has adopted, and an increase with an earlier effective date creates arrears. A rise from 60% to 63% adds 3% of basic pay each month, so for a basic pay of ₹25,500 the gain is ₹765 a month and four months of arrears are ₹3,060. If your company is a DPSU, DA may follow its own board decision, so check the circular before you rely on the percentage.

NPS or Old Pension Scheme?

Employees who joined the Ordnance Factories after 1 January 2004 are covered by NPS, and the tool deducts 10% of Basic Pay plus DA when the box is ticked. Those who joined earlier are generally under the old pension scheme. After the transfer to DPSUs, the pension arrangements of absorbed employees are set out in the company's orders, so verify your own position. For a comparison, see the NPS vs OPS vs UPS calculator.

Bonus and Other Payments

Besides the monthly pay, defence industrial staff may receive an annual productivity linked bonus, leave encashment and other benefits, depending on the rules of the department or company. These are not part of the monthly pay slip, so they are not in the calculator. Confirm the rules and the pay ceiling for the bonus with your pay office.

Common Mistakes

Official Government Sources

Always confirm rates, effective dates and rules on the official websites below. These links open in a new tab, and we do not control their content.

Frequently Asked Questions (FAQ)

How is night duty allowance calculated for defence civilians?

(Basic Pay + DA) ÷ 200 × hours of night duty, for employees whose basic pay is within the ceiling of ₹43,600 under the 7th CPC. Check your unit's orders.

What is piece work bonus in an ordnance factory?

An incentive paid to piece workers for time saved against the time allowed for a job. Factories use names such as piece work profit. The rate depends on your scheme.

How is overtime paid to factory workers?

The Factories Act requires overtime at twice the ordinary rate of wages. The tool uses (Basic + DA) ÷ standard hours × 2.

Do ordnance factory employees get DA at the central rate?

Many do, but terms depend on whether you are in a DPSU or a department. Check your company's orders and edit the DA rate in the tool.

Which companies replaced the Ordnance Factory Board?

Seven DPSUs: MIL, AVNL (AVANI), AWEIL, TCL, YIL, IOL and GIL.

Is NPS deducted from ordnance factory pay?

Employees under NPS contribute 10% of Basic Pay plus DA. Untick the box if you are under the old pension scheme.

Is this calculator official?

No. It is an estimate. Your company or department orders decide each formula and rate.

Related Calculators

All Pay and Salary CalculatorsDefence DA CalculatorDA Arrears Calculator 2026DA 63% Impact MatrixTransport Allowance CalculatorHRA Calculator7th CPC Salary CalculatorPay Matrix LookupNon-PLB (Ad-Hoc) Bonus Order 2025-26Railway PLB 78 Days Calculation - Productivity Linked Bonus8th Pay Commission Arrears from January 2026 CalculatorAnnual Increment Calculator (7th CPC)