Pension Calculator 7th CPC: Central Government Pension & DR

Calculate your central government pension, Dearness Relief and the effect of the minimum and maximum pension.

Monthly Pension + DR
Six-Monthly Periods Counted
Basic Pension
Dearness Relief
Pension if Fully Commuted by 40%
Family Pension (30% of last pay)

Estimate for employees under the Old Pension Scheme. Confirm with your PPO and pension office.

Share:TelegramFacebookX

Central Government Pension: The Basic Rule

For central government employees who are covered by the Old Pension Scheme, the pension on superannuation is worked out from the average emoluments of the last ten months and the length of qualifying service. With the full qualifying service of 33 years, the pension is 50% of the average emoluments. With less service, the pension is reduced in proportion. This calculator uses the Central Civil Services (Pension) Rules for the calculation, and it shows the pension, the Dearness Relief and the total at the DR rate that you enter.

The rule applies to employees who joined before 1 January 2004. Employees who joined later are covered by the National Pension System or the Unified Pension Scheme, which work differently. See the NPS vs OPS vs UPS calculator for the comparison.

Minimum Service and Emoluments

A pension is payable if the employee has completed at least ten years of qualifying service. With less than ten years, a service gratuity is paid and not a pension. The emoluments for the pension are the basic pay, without DA, and they are averaged over the last ten months of service; check the rules for special cases. Qualifying service is counted in six-monthly periods, with a fraction of three months or more taken as six months, and the maximum is 33 years. Check your service book for the exact qualifying service, because non-qualifying periods, such as unauthorised absence, are excluded.

The Formula and Limits

Pension = 50% × Average Emoluments × (Qualifying Service ÷ 33 years)

The pension has a floor and a ceiling. The minimum pension is ₹9,000 a month for those with the required service, and the maximum is ₹1,25,000 a month, which is 50% of the highest pay of ₹2,50,000. Dearness Relief is added to the pension at the rate that applies. The calculator applies the limits automatically.

Example 1: Average pay ₹56,100, 30 years

The pension is 50% × ₹56,100 × 30 ÷ 33, which is about ₹25,500. With DR at 60%, the total is about ₹40,800.

Example 2: Average pay ₹56,100, 20 years

The pension is about ₹17,000, and with DR at 60%, it is about ₹27,200.

Example 3: Low pay and the minimum pension

For an employee with an average pay of ₹18,000 and 33 years of service, the formula gives ₹9,000, which equals the minimum pension.

Ready Reckoner: Pension for 33 Years of Service

The table shows the pension for full service of 33 years at five levels of average emoluments, with DR at 60%.

Last Pay / Average Emoluments (33 years)Basic PensionDR at 60%Pension + DR
₹35,400₹17,700₹10,620₹28,320
₹56,100₹28,050₹16,830₹44,880
₹78,800₹39,400₹23,640₹63,040
₹123,100₹61,550₹36,930₹98,480
₹225,000₹112,500₹67,500₹180,000

Dearness Relief on the Pension

Dearness Relief is added to the basic pension at the same percentage as DA. When DR is revised, the monthly pension rises, and the arrear is paid for the months of delay. Use the pensioners DR calculator for the increase and the arrear, and the DA rate chart for the history of the rates.

Commutation, Gratuity and Family Pension

A retiring employee can commute up to 40% of the pension for a lump sum, and the commuted part is restored after 15 years. The calculator on the pension commutation page shows the lump sum, and the restoration rules page explains the restoration. The gratuity is separate: see the DCRG gratuity calculator. The family pension after the death of a pensioner is generally 30% of the last pay, with an enhanced rate for a limited period under the rules, and this is calculated by the pension office.

Checking Your Pension Papers

Before retirement, the pension papers are prepared and the Pension Payment Order (PPO) is issued. Check the PPO for the qualifying service, the emoluments and the basic pension, and compare them with this calculator. If there is a difference, take it up with your pension sanctioning office in good time. For leave encashment and the provident fund, see the leave encashment calculator and the GPF interest calculator. You can also return to the home page.

Who Is Covered by This Calculator

The calculator is for central government employees under the Old Pension Scheme, including those who retired or will retire on superannuation, and those who take voluntary retirement with the required service. Employees who joined on or after 1 January 2004 are generally covered by the National Pension System, and some of them can choose the Unified Pension Scheme. Defence personnel and state government employees follow their own pension rules, which differ in details such as the qualifying service and the rate. If you are in one of these groups, use the calculator only as a rough guide and check your own rules.

Voluntary Retirement and Invalid Pension

An employee who takes voluntary retirement after the required service, for example 20 years of qualifying service, is paid a pension that is calculated on the same method, with the service that has been completed. The pension is not reduced for age, but the employee may not receive the pension for the service that has not been rendered. Invalid pension, which is paid when an employee retires because of a disability, has its own rules. The calculator uses the superannuation method, and it can be used as a guide for the voluntary retirement case if you enter your actual qualifying service.

How Qualifying Service Is Counted

Qualifying service begins from the date of the regular appointment, and it is counted in completed six-monthly periods, with a fraction of three months or more taken as six months. Some periods are not counted, such as periods of unauthorised absence, and some are counted with conditions, for example the service of a temporary employee before regularisation, and the service in certain earlier posts. The service book is the record, and the pension papers show the final qualifying service. If your papers show a different figure, ask the pension section to explain the difference.

Examples of the Effect of Service on Pension

The pension is proportional to the service, so each additional year adds about three percent of the full pension. An employee with 25 years of service receives about 76% of the pension of an employee with 33 years, and an employee with 15 years receives about 45%. Because of the minimum pension, an employee at a low pay level may receive the same pension for a range of service. Use the calculator to test different years and to see where the minimum pension applies, and plan your retirement date with these numbers in mind.

Official Government Sources

Always confirm rates, effective dates and rules on the official government websites below. These external links open the official sites in a new tab, and we do not control their content.

Frequently Asked Questions (FAQ)

How is central government pension calculated?

Pension = 50% × average emoluments of the last 10 months × (qualifying service ÷ 33 years), with at least 10 years of qualifying service. The minimum is ₹9,000 and the maximum ₹1,25,000 a month.

What is the minimum qualifying service for a pension?

Ten years of qualifying service. With less, a service gratuity is paid and not a pension.

Is DA included in the pension calculation?

No. The pension is based on basic pay, and Dearness Relief is added to it at the DA rate.

Does this calculator apply to NPS employees?

No. It is for employees under the Old Pension Scheme. NPS and UPS work differently, so see the NPS vs OPS vs UPS calculator.

How much of the pension can be commuted?

Up to 40% of the pension can be commuted for a lump sum, and it is restored after 15 years.

Related Calculators

All Pension and Retirement CalculatorsPensioners DR CalculatorPension Commutation CalculatorPension Commutation Guide (CCS Rules & 8th CPC)Commuted Pension Restoration (15 Years)GPF Interest CalculatorGPF Interest Rate Oct-Dec 2026DCRG Gratuity CalculatorLeave Encashment CalculatorPensioner Tax CalculatorNPS Tier 2 vs Mutual Fund CalculatorJudicial Officer Pay Calculator (SNJPC)VPF vs NPS CalculatorCommuted Pension Recovery TrackerFamily Pension and Death Gratuity CalculatorVRS Pension and Lump Sum Calculator5th, 6th & 7th CPC Pay Conversion